Logo
Catagory: Alarm Interface
Records 1 to 3 of 3
Part Number: DLI-GMJ
product image
Door lock interface for GM and Jeep vehicles.
• Interfaces into the Class 2 Data Bus, no need to remove door panels or running wires to BCM.
• Lock input wire.
• Driver's door priority unlock input wire.
• Unlock all doors input wire.
• Factory Alarm Disarm input wire.
• Programmable to select vehicle type.
• Windows Roll Up when armed on selected vehicles.
• Connects at OBDII Diagnostic connector underneath dash.
Instructions Application Guide
Part Number: TR7
product image
The TR7 Is a universal module that combines many features into one box. Carrying one TR7 will cover more than 16 different SKU#.
• Low voltage trigger.
• Alpine video bypass.
• Latching outputs.
• Double pulse output.
• Pulse extender.
• Horn honking output.
• Linear actuator controller.
• Door lock pulse generator.
• Channel splitter.
• Pulses to constant output.
• 3 in 1 timer outputs.
• Pulses to latch/unlatch outputs.
• Pulses to pulse output.
• Pulses to timed output.
• Latching outputs #2.
• Turn on pop delay.
• Delayed amp turn off.
•(PLUS 2 more) in a new case design.
This product is solely for the purpose of interfacing with a rear backup camera. PAC warrants that the product delivered pursuant to this Invoice shall be free of defects in material and workmanship. PAC SHALL NOT BE LIABLE FOR CLAIMS OF ANY LOSS OR DAMAGE, CONSEQUENTIAL, DIRECT OR INDIRECT, ARISING FROM THE SALE OR USE OF PAC's PRODUCTS. CUSTOMER IS SOLELY RESPONSIBLE FOR COMPLYING WITH ALL FEDERAL, STATE AND LOCAL LAWS PERTAINING TO THE USE OF THE PRODUCTS.
Instructions Application Guide
Part Number: TR-7 {Item No Longer Available}
product image
The TR-7 Is a universal module that combines many features into one box. Carrying one TR-7 will cover more than 16 different SKU# and here is some of them:
• Low voltage trigger.
• Alpine video bypass.
• Latching outputs.
• Double pulse output.
• Pulse extender.
• Horn honking output.
• Linear actuator controller.
• Door lock pulse generator.
• Channel splitter.
• Pulses to constant output.
• 3 in 1 timer outputs.
• Pulses to latch/unlatch outputs.
• Pulses to pulse output.
• Pulses to timed output.
• Latching outputs #2.
• Turn on pop delay.
• Delayed amp turn off.
This product is solely for the purpose of interfacing with a rear backup camera. PAC warrants that the product delivered pursuant to this Invoice shall be free of defects in material and workmanship. PAC SHALL NOT BE LIABLE FOR CLAIMS OF ANY LOSS OR DAMAGE, CONSEQUENTIAL, DIRECT OR INDIRECT. ARISING FROM THE SALE OR USE OF PAC's PRODUCTS. CUSTOMER IS SOLELY RESPONSIBLE FOR COMPLYING WITH ALL FEDERAL, STATE AND LOCAL LAWS PERTAINING TO THE USE OF THE PRODUCTS.
Instructions Bulletins FAQ's Application Guide
 
Pacific Accessory Corporation
1340 Ritchey St. • Santa Ana, CA 92705 • USA
Voice: (714)835-3022 • Fax: (714)835-3233
Copyright ©2009 PAC