 |
| Catagory: Crossovers |
Records 1 to 4 of 4 |
| Part Number: Passive Crossovers
|
|
|
| Power resistors allow you to increase resistance to particular speakers to reduce signal volume. Reducing signal
volume of tweeters, rear fill, center channel or
other small speakers is a very easy way to produce a better balanced system. |
• Can be used individually or in any combination to develop almost any desired resistance.
• Capable of handling 50 watts of speaker input.
|
| Part
# |
Description |
| R1 |
1 Ohm resistance |
| R2 |
2 Ohm resistance |
| R6 |
6 Ohm resistance |
| R8 |
8 Ohm resistance |
| POT 50K |
0-50k ohm adjustable, audio
tapered, dual potentiometer (not shown).
For RCA level signal. |
|
|
|
|
|
| Part Number: Passive Crossovers
|
|
|
| Polypropylenes: Often a crossover with the needed crossover point or slope cannot be found. If you buy a mid range/tweeter set with a factory provided crossover and it doesn't sound right to your customer, you need to build one. |
| Non-polar 160 volt high-frequency Polypropylenes that will handle 500 watts of
power and have a tolerance of less than 5% |
Part#
| P23 |
P9.9 |
P5.3 |
P3.3 |
P1.9 |
| P20 |
P9.4 |
P5 |
P2.8 |
P1.8 |
| P18 |
P8.8 |
P1.7 |
| P16 |
P8 |
P4.4 |
P2.5 |
P1.4 |
| P14 |
P7 |
P4 |
P2.3 |
P1.3 |
| P13 |
P6.6 |
P3.8 |
P2.2 |
P1 |
| P11 |
P5.6 |
P3.5 |
P2 |
P.47 |
|
|
|
|
|
| Part Number: Passive Crossovers
|
|
|
Electrolytics: Often a crossover with the needed crossover point or slope cannot be found. If you buy a mid range/tweeter set with a factory provided crossover and it doesn't sound right to your customer, you need to build one.
Non-polar 100 volt Electrolytics that will handle up to 250 watts of power and
have a tolerance of less than 10% to insure that you hit the calculated crossover
point. |
PART#
| 468NP100 |
99NP100 |
20NP100 |
4.4NP100 |
| 398NP100 |
94NP100 |
18NP100 |
4NP100 |
| 331NP100 |
83NP100 |
16NP100 |
3.8NP100 |
| 318NP100 |
80NP100 |
14NP100 |
3.5NP100 |
| 281NP100 |
70NP100 |
13NP100 |
3.3NP100 |
| 265NP100 |
66NP100 |
11NP100 |
2.8NP100 |
| 234NP100 |
56NP100 |
9.9NP100 |
2.7NP100 |
| 225NP100 |
50NP100 |
9.4NP100 |
2.5NP100 |
| 199NP100 |
47NP100 |
8.8NP100 |
2.3NP100 |
| 188NP100 |
40NP100 |
8NP100 |
2.2NP100 |
| 165NP100 |
35NP100 |
7NP100 |
2NP100 |
| 159NP100 |
33NP100 |
6.6NP100 |
1.9NP100 |
| 141NP100 |
28NP100 |
5.6NP100 |
1.8NP100 |
| 133NP100 |
27NP100 |
5.3NP100 |
1.7NP100 |
| 117NP100 |
25NP100 |
5NP100 |
1.4NP100 |
| 113NP100 |
23NP100 |
4.7NP100 |
1.3NP100 |
|
|
|
|
|
|
| Part Number: Passive Crossovers
|
|
|
| Bass Blockers remove or 'cut out' sounds that are below a certain frequency. They are designed to enhance the performance and power handling of tweeters and midrange speakers by removing frequencies beyond their capabilities.
|
• Easily handles power of up to 50 watts.
• Leads are color coded to prevent misapplication.
• Encased in shrink tube with wire leads for easy installation. |
Part# |
4
Ohm |
8
Ohm |
Wire
color |
BB-85 |
0-85 Hz |
0-43 Hz |
Gray |
BB-100 |
0-100 Hz |
0-50 Hz |
White |
BB-150 |
0-150 Hz |
0-75 Hz |
Brown |
BB-1 |
0-300 Hz |
0-150 Hz |
Blue |
BB-2 |
0-600 Hz |
0-300 Hz |
Green |
BB-4 |
0-1.2 kHz |
0-600 kHz |
Orange |
BB-5 |
0-2.8 kHz |
0-1.4 kHz |
Red |
BB-6 |
0-5.6 kHz |
0-2.8 kHz |
Black |
|
|
BB-2-2 |
Pair of BB-2's, packaged |
|
|
|
|
|
|
|
|
|
| |
Pacific Accessory Corporation
1340 Ritchey St. • Santa Ana, CA 92705 • USA
Voice: (714)835-3022 • Fax: (714)835-3233
Copyright ©2009 PAC |
|
|
